1 metre long waney edge board with a width range of 16-21cm by 50 / 55 mm thick. Width will vary slightly over the length of the board. May contain some slight splits due to kiln drying process.
If you leave a note when ordering on what you intend to use the board for, I will try to select one that meets the requirement. For example, some boards are more highly figured but have the odd knot in them. If you're cutting the board into smaller sections, this would not be a problem, but if you were using the board whole it may be. Also, some highly figured boards have defects on one side only - not a problem if the item being made is only visible from one side.
